Page 1 of 1

XE7 CodeGuard problem

PostPosted: Sun Jun 16, 2019 4:28 am
by denville
Hello, having successfully recently built a 32-bit project in XE7 I thought I would give CodeGuard a spin. In Tools-Configure I configured it for memory leaks (only). In Project Options I enabled CodeGuard, having ensured that Link with Dynamic Libraries and Compile With Packages are off (as prescribed in the only useful link I could find:

http://wiltonsoftware.com/posts/view/en ... -detection

I cleaned and rebuilt the whole project but it won't run:

The procedure entry point __cg__sopen could not be found in the dll CG32.DLL.

(I do have the dll in the XE7 files)

Any ideas ?

Thanks.